Siemens SINAMICS Series Operating Instructions Manual page 77

Intelligent operator panel. intelligent commissioning and application configuration tool

Hide thumbs Also See for SINAMICS Series:

Table of Contents

Creating the exception list

To create the list of parameters that will be included in the exception list, the following

procedure should be performed:

Intelligent Operator Panel (IOP)

Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB

Parameter p7763 is displayed. Press "OK" to edit the

parameter.

Input the number of parameters to be included in the

exception list.

Important note: Although the maximum range shown on

the screen is 65535, the maximum number of

parameters in the exception list must not exceed 500.

Select "Menu" from the main screen.

Select "Parameters" from the menu.

Select "Search by number" from the Parameters menu.

6.7 Know-how Protection

Table of Contents