Siemens SINAMICS Series Operating Instructions Manual page 62

Menu
6.5 Extras
4.
5.
6.
7.
8.
62
Select the required units of measure to be displayed
on the status screen.
Select the required number of decimal places to be
displayed for the choosen units of measure.
On completion of the user selections, a summary of
the settings is displayed.
If the settings are correct, then select "Continue" to
move to the next step.
The option to save the settings is displayed.
Select "Save" to save the settings, or select "Cancel
Wizard" to exit the Wizard.
If "Cancel Wizard" is selected, no changes will be
saved and the Status Screen will remain unchanged
from any previously set configuration.
If "Save" has been selected, all changes will be
saved.
When the save has completed successfully, the
screen will automatically return to the status screen
and display the new status screen as configured in
the wizard.
Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB
Intelligent Operator Panel (IOP)