Siemens SINAMICS Series Operating Instructions Manual page 56

Menu
6.3 Parameters
Saving & reset
This option allows the user access to all the parameters
regarding the saving and reset functions of the Inverter.
Each parameter displays is currently set value and these can
be modified if required.
System information
This screen displays all the parameters that contain system
information regarding the Inverter. The majority of these
parameters are read-only and are for information purposes
only.
Basic settings
Displays the effective Drive Data Set (DDS).
Each basic setting can be selected and modified if necessary.
Inputs/outputs
This option allows access to all the necessary parameters to
configure the following signals:
• Digital inputs
• Digital outputs
• Analog inputs
• Analog outputs
The user can navigate through the various inputs and outputs
to see the current configuration of the inputs and outputs and,
if necessary access the parameters directly to modify their
values. In the example screen opposite, the parameters for
the digital inputs is shown.
56
Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB
Intelligent Operator Panel (IOP)