Siemens SINAMICS Series Operating Instructions Manual page 33

Intelligent operator panel. intelligent commissioning and application configuration tool

Hide thumbs Also See for SINAMICS Series:

Table of Contents

Intelligent Operator Panel (IOP)

Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB

Select "Enter Motor Data" to manually enter the motor

data from the rating label of the motor.

Select "Enter Motor Code" to enter the motor code from

the motor rating label.

All the relevant motor data will be automatically entered.

The IOP will then present a number of screens, specific to your selction of Step 5 or

Step 6. Enter the relevant data in the appropriate fields as they are presented. You will

automatically advanced through the commissioning process. Once the motor data has

been entered, the steps shown below will be presented.

Select to run or disable the motor data identification

function.

This function, if active, will not start until the first run

command is given by the converter.

Select either zero pulse or no zero pulse for the at-

tached encoder.

If an encoder is not fitted to the motor, this option will

not be displayed.

Wizards

4.1 Example wizard

Table of Contents