Siemens SINAMICS Series Operating Instructions Manual page 58

Menu
6.3 Parameters
Diagnostics
This option allows the user direct access to the parameters
that monitor the state of the system. The are divided into the
following functional groups:
• Control/status words
• Interconnections
• Faults/alarms
All the parameters under these groupings are read-only and
cannot be modified.
Search by number
This option allows the user to search for a specific parameter
number. Should the parameter number not exist, then the
nearest parameter to the entered value is displayed.
Use the Wheel to alter the value of each digit and press the
Wheel to confirm. The next digit will automatically be
highlighted, rotate the Wheel to change the value and press
the Wheel to confirm. Once all fields have been entered, the
IOP will display the parameter. If a wrong digit is selected,
press Esc to go back one digit.
If the parameter number does not exist, the screen will display
a choice between "Select a new number" or "Go to the near-
est parameter number".
My parameters
This option allows the user to select the parameters that they
wish to list. The user is presented with a list of parameters
that can be selected. Once selected - only those parameters
are displayed when the "My Parameters" option is selected.
There are additional options that allow the user to manage
their list of parameters.
58
Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB
Intelligent Operator Panel (IOP)