Siemens SINAMICS Series Operating Instructions Manual page 66

Intelligent operator panel. intelligent commissioning and application configuration tool

Hide thumbs Also See for SINAMICS Series:

Table of Contents

6.5 Extras

Drive identity

This option allows the user to display the technical details of

the components that comprise the Inverter system. This

includes the details of the Control Unit and Power Module.

This is a read-only screen and cannot be modified.

Parameter settings

Drive factory reset

There are two factory reset options:

Factory reset

factory default settings. Any safety parameters that have

been modified will not be reset.

Safety factory reset

parameters, including the safety parameters back to the

factory default settings.

Parameter filter

This option allows the user to select the parameter access

level. Standard is the default access level, which gives the

user access to the most frequently used parameters. Expert

level gives access to all available parameters.

- This option reset all parameters to there

- This option reset all the drive

Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB

Intelligent Operator Panel (IOP)

Table of Contents