Table of Contents
Advertisement
3 - Installing your modem/router
3.2
Installing and configuring your modem/router on your
computer's USB port
3.2.1
In Windows
The USB port of the SAGEM F@st™ 1200/1240 is a USB 1.1 port supporting a maximum bit
rate of 12 Mbit/s. The connector is type B.
On this port, you can connect directly to a computer with a type A USB port using a USB lead
(supplied with the equipment).
Do not connect the USB lead until prompted by the installation procedure (that is,
after installing the drivers).
The installation procedure described below was performed in
Windows XP. Installation in other Windows operating systems (98,
ME and 2000) may present slight differences.
Insert the CD-ROM in your computer's
1
appropriate drive; the screen opposite
appears.
Carry out the operations described on
screen.
Click the
continue installation.
Note: If this screen does not appear: Select Start, then Run, then enter:
"<CD-ROM drive letter> :\F@st1200.exe then click OK.
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 3-10
Sagem Communication document. Reproduction and disclosure prohibited
button to
Advertisement
Table of Contents
