Powering Up; Connecting The Adsl Lead To The Sagem F@St™ 1200/1240; Connecting The Sagem F@St™ 1200/1240 With The Phone Wall Socket Via Filter/Spitter; Connecting The Sagem F@St™ 1200/1240 To A Computer Via The Eth Lead - Sagem F@st 1200 User Manual

2 - Description
2.2.1

Powering up

First connect the end of the mains adapter lead (adapter supplied with the equipment) to the
PWR socket on your SAGEM F@st™ 1200/1240,
Connect the adapter to a nearby mains outlet,
Set the "I/0" switch to the "I" position,
The PWR LED lights first followed by the other three LEDs, then the other three LEDs switch
off in turn.
2.2.2 Connecting the ADSL lead to the SAGEM F@st™ 1200/1240
Connect the other end of the lead to the port marked ADSL on the splitter connected to your
home's standard French wall telephone outlet (T connector).
2.2.3 Connecting the SAGEM F@st™ 1200/1240 with the phone
wall socket via Filter/Spitter
Connect one end of the RJ11/RJ11 lead supplied to the
SAGEM F@st™ 1200/1240.
Connect the other end of this lead to the port marked ADSL on the filter/splitter.
Connect the LINE filter/splitter port to the phone wall socket.
Connect the PHONE filter/splitter port to your telephone.
2.2.4 Connecting the SAGEM F@st™ 1200/1240 to a computer
via the ETH lead
This connection is set up on installation with the dedicated CD-ROM.
2.2.5 Connecting the SAGEM F@st™ 1200/1240 to a computer
via the USB lead
This connection is set up on installation with the dedicated CD-ROM.
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 2-6 Sagem Communication document. Reproduction and disclosure prohibited
LINE socket on your