Table of Contents
Advertisement
5 - Configuration
PPPoA
Field
Network Setting
Authentication
User Name
Password
MER
Field
Network Setting
IP Address
Subnet Mask
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 5-12
Sagem Communication document. Reproduction and disclosure prohibited
Enable NAT
:
Check the appropriate box to enable address
translation (NAT) (Recommended).
Select one of the proposed authentication modes (CHAP or PAP).
Enter the user name (32 characters maximum) supplied by your
Internet Service Provider (ISP).
Enter the password (32 characters maximum) supplied by your Internet
Service Provider (ISP).
:
Check the appropriate box to enable address
Enable NAT
translation (NAT) (Recommended).
Enable DHCP :
Check
modem/router's "DHCP client" function.
This field is active only when the "DHCP client" is deactivated (Enable
DHCP field check box not checked).
Enter a network IP address.
This field is active only when the "DHCP client" function is deactivated
(Enable DHCP field check box not checked).
Enter a subnetwork mask.
Meaning
Meaning
the
appropriate
box
to
enable
the
Advertisement
Table of Contents
