In Mac Osx - Sagem F@st 1200 User Manual

3 - Installing your modem/router
3.1.2

In Mac OSX

The configuration procedure described below was performed in Mac OS 10.4.1 (Tiger). It
can be performed in other operating systems such as Mac OS X 10.2 and 10.3.
For the configuration application installed on your Macintosh to be able to communicate
with your modem/router's embedded software, the IP addresses of your computer and of
your SAGEM F@st
have two options:
To activate your modem/router's DHCP Server and configure your Macintosh in
DHCP Client mode. The DHCP server will then automatically supply your computer
with an IP address
recommended for inexperienced
To manually configure the IP addresses of your modem/router and your Macintosh,
taking care to ensure that the IP addresses are in the same plan. The default IP
address for your SAGEM F@st
example, assign your computer the address 192.168.1.12.
If you incorrectly assign or lose the IP address of your modem/router, you should refer to
Appendix A - Troubleshooting.
The paragraph below indicates the procedure for configuring the Macintosh in DHCP client
mode, in order to obtain an IP address automatically from the modem/router.
1
Click the (apple) menu in the
menu bar, select " System
Preferences ", then click the
"Network" icon.
The screen opposite appears.
In the shaded field "Built-in Ethernet":
A green indicator lamp indicates
activation (performed automatically
on connecting the Ethernet lead
from your SAGEM F@st
1200/1240).
If your Macintosh is already
configured in DHCP client mode
and the DHCP server is running in
your SAGEM F@st
the IP address assigned to your
computer by the modem/router is
specified.(example: 192.168.1.12).
Click the "Configure" button to modify
or check your Macintosh's
configuration.
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 3-8 Sagem Communication document. Reproduction and disclosure prohibited
TM
1200/1240 need to be in the same addressing plan. For this, you
(default configuration of the SAGEM F@st
users).
TM
1200/1240 is 192.168.1.1. You can therefore, for
TM
TM
1200/1240,
TM
1200/1240,