Installing And Configuring Your Router In The Usb Port Of Your Computer - Sagem 1201 Reference Manual

3 - Installing and configuring the router
3.2 Installing and configuring your Router in the USB port of
your computer
The USB port of your router is of the USB 1.1 type allowing a maximum transmission rate of
12 Mbit/s.
With this port, you can connect directly to a computer located at a type A USB input, using a
USB cord (supplied with the equipment).
The USB interface must in all cases be installed before the USB connector is
connected.
The installation procedure described below was undertaken in Windows® XP.
Installation in other Windows operating systems® (98, ME and 2000) can be
slightly different.
You have selected the USB interface;
1
the screen opposite appears.
Make the electrical connection as
described on the screen.
Click button
the installation.
2 The screen opposite appears.
Make the connection of the ADSL line
as described on the screen.
Click button
the installation.
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 3-8 Sagem Communication document. Reproduction and disclosure prohibited
to continue
to continue