Sagem F@st 1200 User Manual
  1. Manuals
  2. Brands
  3. Sagem Manuals
  4. Modem
  5. F@ST 1200
  6. User manual

Sagem F@st 1200 User Manual

Hide thumbs Also See for F@st 1200:
Table of Contents

Advertisement

Quick Links

Download this manual
TM
SAGEM F@st
1200/1240
User Guide
252 569 421-01
February 2006 edition

Advertisement

Table of Contents
loading

Related Manuals for Sagem F@st 1200

Summary of Contents for Sagem F@st 1200

  • Page 1 SAGEM F@st 1200/1240 User Guide 252 569 421-01 February 2006 edition...

  • Page 2: Warning

    Warning Sagem Communication closely follows all technological changes and is continually striving to improve its products for the benefit of its customers. It therefore reserves the right to change its documentation accordingly without notice. All the trademarks mentioned in this guide are registered to their respective owners: - SAGEM F@st™...

  • Page 3: E 2002/96/Ce Directive

    Preservation of the environment as part of a sustainable development logic is an essential concern of Sagem Communication. Sagem Communication‘s aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.

  • Page 4: Table Of Contents

    Connecting the SAGEM F@st™ 1200/1240 with the phone wall socket via Filter/Spitter 2.2.4 Connecting the SAGEM F@st™ 1200/1240 to a computer via the ETH lead 2.2.5 Connecting the SAGEM F@st™ 1200/1240 to a computer via the USB lead 2.3 Installation instructions 3.
  • Page 5 A.5 Restoring the factory-set configuration B. Appendix B - Safety warnings B.1 Safety warnings B.1.1 Safety levels on the SAGEM F@st™ 1200/1240 unit B.2 CE declaration of conformity C. Appendix C - Technical specifications C.1 Mechanical specifications - Displays C.2 Interface specifications C.3 Environmental specifications...

  • Page 6: List Of Figures

    F.3 "ETH" connector pinout F.4 "LINE" connector pinout List of figures Figure 2.1 - Overview of the unit Figure 2.2 - Interconnecting the SAGEM F@st™ 1200/1240 ports SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 0-4 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 7 This chapter covers an overview of the SAGEM F@st 1200/1240 § 1.1 the composition of the supply § 1.2 the IT requirements § 1.3 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 1-1...
  • Page 8 1 - Introduction Introduction The SAGEM F@st™ 1200/1240 is an IP modem/router with high speed ADSL interface enabling different users to share an ADSL connection in SOHO (Small Office, Home Office) residential usage mode. This modem/router provides Internet access for computers equipped with a USB port and/or an Ethernet port.

  • Page 9: Composition Of The Sagem F@St™ 1200/1240 Package

    1 - Introduction Composition of the SAGEM F@st™ 1200/1240 package The SAGEM F@st™ 1200/1240 is supplied in a package containing: One SAGEM F@st™ 1200/1240 modem/router, One mains adapter, One RJ11/RJ11 FDT ADSL line lead (length = 3 m), One RJ45/RJ45 FDT Ethernet lead (length = 3 m), One Type A male / Type B male USB lead (length = 1.5 m),...

  • Page 10: Prerequisites

    The CD-ROM contains: the software for installing the Ethernet (ETH) and USB interfaces. the SAGEM F@st™ 1200/1240 User Guide in pdf file format. the SAGEM F@st™ 1200/1240 CE declaration. Incomplete or damaged supply. If, on receipt, the equipment is damaged or incomplete, contact your SAGEM F@st™...

  • Page 11: Description And Installation Of Your Modem/Router

    This chapter covers a description of your SAGEM F@st 1200/1240 § 2.1 installation of your SAGEM F@st 1200/1240 § 2.2 installation instructions § 2.3 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-1...

  • Page 12: Description

    The unit has a front panel with four supervisory LEDs and a rear panel with connection ports, an on/off switch and a reset button. Figure 2.1 - Overview of the unit SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 2-2 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 13: Leds

    ADSL line activation This LED blinks slowly when the ADSL line is being synchronized, This LED is lit when the ADSL line is synchronized. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-3...

  • Page 14: Ports

    Type B "Slave" USB female socket for connection to a computer (USB interface). 8-way RJ45 socket for connection either to a terminal or to a local area network (Ethernet 10/100 BASE-T LAN interface). SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 2-4 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 15: Installing The Modem/Router

    2 - Description Installing the modem/router Figure 2.2 - Interconnecting the SAGEM F@st™ 1200/1240 ports SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-5...

  • Page 16: Powering Up

    The PWR LED lights first followed by the other three LEDs, then the other three LEDs switch off in turn. 2.2.2 Connecting the ADSL lead to the SAGEM F@st™ 1200/1240 Connect the other end of the lead to the port marked ADSL on the splitter connected to your home's standard French wall telephone outlet (T connector).

  • Page 17: Installation Instructions

    Arrange the power lead so as to avoid any accidental disconnection of the modem/router. The SAGEM F@st™ 1200/1240 is designed for connection to a TT or TN type power supply network. The SAGEM F@st™ 1200/1240 is not designed to be connected to an IT type electrical installation (power supply with independent neutral).
  • Page 18 2 - Description SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 2-8 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 19: Installing Your Modem/Router

    (Ethernet). Installing and configuring your modem/router on your § 3.2 computer's USB port. Installing and configuring an additional computer. § 3.3 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-1...
  • Page 20 USB interface, you must uninstall the modem/router. To do this: Select Start / All programs / SAGEM F@st™ 1200 / Uninstall. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 3-2 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 21: Installing And Configuring Your Modem/Router On Your Computer's Network Card (Ethernet)

    In Windows The Ethernet socket marked on your SAGEM F@st™ 1200/1240 is provided for you to connect your computers or wired Ethernet network elements. This port is a 10/100BASE-T port. It supports bit rates of 10 Mbit/s and 100 Mbit/s in Half or Full Duplex mode on a category 5 double twisted pair.
  • Page 22 Carry out the operations described on screen. Click the button to continue installation. The screen opposite appears. Click to install your modem/router on the ETH interface. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 3-4 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 23 The screen opposite appears. Select your country of residence and your Internet Service Provider (ISP). Click the button to continue installation. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-5...
  • Page 24 This icon created in the task bar lets you know the status of the modem/router (see Appendix A - Troubleshooting). You can also use the Start menu to select All programs / SAGEM F@st 1200 to access the following options: SAGEM F@st™...
  • Page 25 To surf the Internet, you must enter the correct information, supplied to you by your Internet Service Provider. For this: Open your configurator (see chapter 5), then select the "WAN Setup" tab. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-7...

  • Page 26: In Mac Osx

    IP address assigned to your computer by the modem/router is specified.(example: 192.168.1.12). Click the "Configure" button to modify or check your Macintosh's configuration. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 3-8 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 27 SAGEM F@st 1200/1240's LAN interface (192.168.1.1). You can now close the network window. The DHCP client, DNS servers and Search domains fields are optional. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-9...

  • Page 28: Installing And Configuring Your Modem/Router On Your Computer's Usb Port

    3.2.1 In Windows The USB port of the SAGEM F@st™ 1200/1240 is a USB 1.1 port supporting a maximum bit rate of 12 Mbit/s. The connector is type B. On this port, you can connect directly to a computer with a type A USB port using a USB lead (supplied with the equipment).
  • Page 29 Carry out the operations described on screen. Click the button to continue installation. The screen opposite appears. Click to install your residential modem/router on the USB interface. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-11...
  • Page 30 The screen opposite appears. Select your country of residence and your Internet Service Provider (ISP). Click the button to continue installation. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 3-12 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 31 This icon created in the task bar lets you know the status of the modem/router (see Appendix A - Troubleshooting). You can also use the Start menu to select All programs / SAGEM F@st 1200 to access the following options: SAGEM F@st™...

  • Page 32: In Mac Osx

    "WAN Setup" tab. 3.2.2 In Mac OSX The USB interface is not supported by Mac OSX. Ethernet interface Using is described in section 3.1.2. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 3-14 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 33: Installing And Configuring An Additional Computer

    Note: If this screen does not appear: Select Start, then Run, then enter: "<CD-ROM drive letter> :\F@st1200.exe then click OK. The screen opposite appears. Click SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-15...
  • Page 34 • connecting the modem/router to the telephone socket and the mains outlet, • and configuring your SAGEM F@st™ 1200/1240 (login identifier and login password, etc.), must not be carried out when installing and configuring an additional computer whatever the interface (ETH or USB).

  • Page 35: Information

    4. Information SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 4-1...
  • Page 36 To redisplay this icon, select Start, All programs SAGEM F@st 1200 then click the left mouse button on Information. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 4-2 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 37: Configuration

    Tells you how to access the configurator's home screen. This chapter § 5.1 Gives recommendations for the use of the configuration § 5.2 screens. Details the various modem/router setup functions. §.5.3 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-1...

  • Page 38: Launching The Configurator

    Double-click the configuration icon created on the desktop after installing the equipment: In the Start menu, select programs SAGEM F@st 1200. then left click on Configure. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-2 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 39 5 - Configuration The configuration screen opposite appears with the "Status" tab selected. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-3...

  • Page 40: In Mac Os X

    Click this icon ; the opposite home screen appears. To make the "F@st 1200 Configuration" icon constantly present on the desktop, select in the Home screen with the mouse the following icon: then move it to the desktop.
  • Page 41 To display menu, select it in the drop-down list or click the appropriated tab if this one is displayed at the screen. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-5...

  • Page 42: Recommendations

    You are recommended to save all the parameters that you have altered. Click this button to exit from the application without saving your input. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-6 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 43: Configuring Your Modem/Router

    • Advanced (see 5.3.1.5). 5.3.1.1 Status Object: This function is for viewing the ADSL line statistics. Select the Status tab. The screen opposite appears. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-7...
  • Page 44 Displays the encapsulation supplied by your Internet Service Provider (ISP). Two possible cases: : Virtual Channel (Encapsulation without header). : Logical Link Control (Encapsulation with header). SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-8 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 45 Firmware version ADSL code version Displays the ADSL code. F@st1200 Setup version Displays the configuration application version. No field on the screen can be modified. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-9...
  • Page 46 Depending on the protocol chosen, the number of fields to be completed differs. You must therefore select a protocol mode before completing the various fields. RFC1483 Bridged Common fields only. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-10 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 47 Select DIRECT (Recommended). Enter a delay (expressed in minutes) after which the PPPoE link will Idle timeout (min) disconnect in the absence of Internet traffic. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-11...
  • Page 48 Subnet Mask This field is active only when the "DHCP client" function is deactivated (Enable DHCP field check box not checked). Enter a subnetwork mask. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-12 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 49 If you want to change the address and local subnetwork of your modem/router, you must configure your modem/router's DHCP server in the same network. (see Change of address section). SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-13...
  • Page 50 Secondary DNS Address of your Internet Server Provider's 0.0.0.0 secondary DNS server. Availability period (in days) of each IP address Lease (in days) assigned. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-14 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 51 An example of change of address and subnetwork of the LAN involving a change of network on the modem/router's DHCP server is given below. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-15...
  • Page 52 If you want to use this functionality, enter a local (LAN) IP address. Click the button to register the address entered then the button if you want to save this configuration. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-16 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 53 The screen opposite shows two configurations added. "Delete" button To delete a configuration from the list, select the one you want to delete then click the button. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-17...

  • Page 54: In Mac Osx

    The screen opposite appears. 5.3.2 In Mac OSX The screens appearance and the configurator menus contents in Mac and Windows being similar, refer to section 5.3.1. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page 5-18 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 55 IP address § A.1 interpreting LEDs § A.2 operation alarms § A.3 the IP address § A.4 restoring the factory-set configuration § 0 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page A-1...

  • Page 56: Appendix A - Troubleshooting

    Check that the IP Address entry contains a value other than 0.0.0.0 (192.168.1.10 for example) for the local area network (LAN) interface connected to the modem. SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page A-2 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 57: Interpreting Leds

    (98, ME and 2000) may present slight differences. A.2 Interpreting LEDs The four LEDs on the SAGEM F@st™ 1200/1240 reflect the status of the various interfaces. When the SAGEM F@st™ 1200/1240 is powered up, the PWR LED lights first followed by the other three LEDs, then these last three go off in turn.

  • Page 58: Line" Led Blinking

    Check the connection of your ADSL splitters. Each telephone socket used in your installation should be fitted with an ADSL splitter. Check that the RJ11 line lead supplied with your SAGEM F@st™ 1200/1240 is connected to one of your outlets. The use of telephone extension leads is not recommended.

  • Page 59: All Leds Off

    Check that the type of power supply available in your premises is in accordance with the mains voltage needed to power your SAGEM F@st™ 1200/1240. Check that the power supply lead supplied is correctly connected at one end to the mains power supply network.

  • Page 60: Restoring The Factory-Set Configuration

    To restart your modem/router in factory-set configuration: Press the button using a pointed object until the four LEDs come on steady. Then release this button; your SAGEM F@st™ 1200/1240 restarts in factory-set configuration (Local area network: 192.168.1.0/24 and modem/router address: 192.168.1.1).
  • Page 61 B. Appendix B - Safety warnings This chapter covers safety warnings § B.1 the CE declaration of conformity § B.2 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page B-1...
  • Page 62 Appendix B - Safety warnings B.1 Safety warnings The SAGEM F@st™ 1200/1240 product is compliant with EN 60950, December 2001 edition. The safety levels according to this standard are as follows: B.1.1 Safety levels on the SAGEM F@st™ 1200/1240 unit...

  • Page 63: Appendix B - Safety Warnings

    Ed 09-1998 EN 55 024 Ed 09-1998 Sagem Communication disclaims all liability if the current regulations are not correctly observed at the place of installation. The CE declaration of conformity for the SAGEM F@st 1200/1240 is included in the form of a pdf file on the product delivery CD-ROM.
  • Page 64 Appendix B - Safety warnings SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page B-4 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 65 § C.1 the specifications of the various interfaces § C.2 the environmental specifications § C.3 the software and protocols § C.4 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-1...

  • Page 66: Appendix C - Technical Specifications

    • : Desktop • : Wall-mounted Protection rating • : IP30 Displays Four LEDs Power supply presence USB activity ETH activity LINE ADSL interface SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page C-2 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 67: Interface Specifications

    • 12.5 dBm Port impedance • 100 Ohms Range • 0 to 5500 m (according to ADSL mode) Latency • Simple (Fast or Interlaced) SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-3...
  • Page 68 Mains power supply characteristics Type • Mains lead Class • Mains voltage • 230 V Power consumed • < 8 W Mains connector • Type C Europlug SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page C-4 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 69: Environmental Specifications

    Transmission • EN 55 022 Class B - Ed 01-1999 Harmonic currents • EN 61 000-3-2 • EN 61 000-3-3 • EN 55 024 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-5...

  • Page 70: Software And Protocols

    IP over ATM • RFC 1483/2684 ETH over ATM • RFC 1483/2684 Configuration • LAN port Version download • 1 version Management • From ETH, USB SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page C-6 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 71: Appendix D - Default Configuration

    D. Appendix D - Default configuration This chapter covers the default configuration on the local area network (LAN) § D.1 side SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page D-1...

  • Page 72: Default Configuration On The Local Area Network (Lan) Side

    Appendix D - Default configuration This chapter gives the default parameter settings for the SAGEM F@st™ 1200/1240 on leaving the factory. D.1 Default configuration on the local area network (LAN) side The table below gives the values of the main default LAN parameters for your residential...

  • Page 73: Appendix E - Glossary

    E. Appendix E - Glossary SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page E-1...
  • Page 74 Operation, Administration and Maintenance OBEX OBject, EXchange Personal Area (Ad-Hoc) Network Password Authentication Protocol Peripheral Component Interconnect PCMCIA Personal Computer Memory Card International Association SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page E-2 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 75 Virtual LAN VoIP Voice over IP Virtual Path Virtual Path Identifier Virtual Private Network Wide Area Network Meshed network of information servers Weighted Fair Queuing SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page E-3...
  • Page 76 Appendix E - Glossary SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page E-4 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 77: Appendix F - Connectors

    "USB" connector § F.2 the pinout of the "ETH" connector § F.3 the pinout of the "LINE" connector § F.4 SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page F-1...

  • Page 78: Pwr" Connector Pinout

    The "USB" interface is connected to the equipment via a type B USB socket. Contact N° Signal Meaning PC power supply (+) -Data Subscriber line signal +Data Subscriber line signal Ground Ground SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page F-2 Sagem Communication document. Reproduction and disclosure prohibited...

  • Page 79: Eth" Connector Pinout

    1 2 3 4 5 6 Contact N° Signal Meaning LINE-A Line A signal LINE-B Line B signal Not Connected Not Connected Not Connected Not Connected SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Sagem Communication document. Reproduction and disclosure prohibited Page F-3...
  • Page 80 Appendix F - Connectors SAGEM F@st™ 1200/1240 User Guide - 252569421-01 Page F-4 Sagem Communication document. Reproduction and disclosure prohibited...
  • Page 82 Siège social : 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE Tél. : +33 1 40 70 63 63 - Fax : +33 1 40 70 66 40 http://www.sagem.com Société Anonyme au capital de 300 272 000 € - 480 108 158 RCS Paris...

This manual is also suitable for:

F@st 1240

Table of Contents