Sagem F@st 1200 User Manual page 50

5 - Configuration
DHCP SERVER CONFIGURATION
Object: This function is for "Enabling" or "Disabling" the modem/router's DHCP server
function with its own parameters. The DHCP server automatically assigns an IP
configuration to any computer connected to the modem/router.
This area displays all the default settings of the modem/router's DHCP server.
The DHCP server is always "Enabled" by default (
If you want to change the DHCP server settings, you must save the
configuration (SAVE button) then reset the modem and all the equipment
connected to it.
Field
Starting IP Address
End IP Address
Subnet
Gateway
Primary DNS
Secondary DNS
Lease (in days)
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 5-14 Sagem Communication document. Reproduction and disclosure prohibited
Meaning
The first address assigned by the DHCP server.
Note: This IP address should belong to the same
subnetwork as that of the modem/router IP
address.
The last address assigned by the DHCP server.
Note: This IP address should belong to the same
subnetwork as that of modem/router IP address.
IP subnetwork mask.
Gateway address (LAN address of the
modem/router).
Address of your Internet Server Provider's primary
DNS server.
Note: Set by default to the LAN address of the
modem/router to be used as a DNS relay
(recommended).
Address of your Internet Server Provider's
secondary DNS server.
Availability period (in days) of each IP address
assigned.
button showing).
Default
192.168.1.10
192.168.1.50
255.255.255.0
192.168.1.1
192.168.1.1
0.0.0.0
7