Table of Contents
Advertisement
All the troubleshooting procedures described below were carried out in
Windows XP. The procedures in other Windows operating systems
(98, ME and 2000) may present slight differences.
A.2 Interpreting LEDs
The four LEDs on the SAGEM F@st™ 1200/1240 reflect the status of the various interfaces.
When the SAGEM F@st™ 1200/1240 is powered up, the PWR LED lights
first followed by the other three LEDs, then these last three go off in turn.
A.3 Operation alarms
These alarms reflect events occurring while the SAGEM F@st™ 1200/1240 is operating. They
can be diagnosed using the green LEDs on the front panel of the unit or via the icon in the task
bar.
Front panel green LEDs
The table below gives the meaning of the various LEDs.
Marking
On steady
Blinking slowly
Off
Sagem Communication document. Reproduction and disclosure prohibited
PWR
Power supply
Activation/Activity
presence
on USB link
_
No power supply
No activity on USB link
Appendix A - Troubleshooting
USB
ETH
Activity on ETH link
_
In pace with traffic
On activity on ETH link
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
LINE
ADSL line
synchronized
ADSL synchronizing
(see section A.3.1)
Line not connected
Page A-3
Advertisement
Table of Contents
