1 - Introduction
The CD-ROM contains:
the software for installing the Ethernet (ETH) and USB interfaces.
the SAGEM F@st™ 1200/1240 User Guide in pdf file format.
the SAGEM F@st™ 1200/1240 CE declaration.
Incomplete or damaged supply. If, on receipt, the equipment is damaged or
incomplete, contact your SAGEM F@st™ 1200/1240 supplier.
1.3
Prerequisites
To use the SAGEM F@st™ 1200/1240, you need the following:
one or more service provider subscriptions.
a computer with:
•
a TCP / IP protocol stack,
•
a type A USB interface.
or
•
an Ethernet 10BASE-T or 10/100BASE-T interface,
Operating systems supported:
•
Windows: 98 2
•
MAC OS X
•
Linux Redhat 9.1 and Fedora Core3, Mandrake 10.1, Suse 9.2
Minimum computer configuration:
for Windows: Pentium II, 400 MHz, RAM: 128 Mb,
for MacOS: Power PC G3, 233 MHz, RAM: 128 Mb,
30 Mb free on your hard disk,
a monitor with minimum resolution: 1024 x 768.
Before installing the SAGEM F@st™ 1200/1240 modem/router, we would advise
you to uninstall any other modem or router.
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 1-4
Sagem Communication document. Reproduction and disclosure prohibited
nd
Edition, ME, 2000 and XP