Table of Contents
Advertisement
SAGEM F@st
2.6.3
Updating the modem software from the BridgeMon
application
The SAGEM F@st™ 908/948 contains a permanent memory for saving the onboard software.
This software can be updated from the BridgeMon application.
Click the SW Upgrade button in the
"BridgeMon"
screen
opposite appears.
Click Yes to continue (No to abort).
The screen opposite appears.
Use the Browse button to select the .img
file containing the new software then click
the Upgrade button to update the onboard
software in non-volatile memory (save the
.img file, the default name and location of
which are displayed in the Location: field).
Notes : Click Cancel to abandon any changes made and return to the BridgeMon screen.
Click Restore to restore the modem software to its ex-works state.
2.6.4
"Bridge Lock" traffic lock function
This function is used to increase the security level on the local area network (LAN) by blocking
traffic from the Internet in certain conditions. It is activated in one of two ways, from the
"BridgeMon" application:
•
Manually,
•
Automatically.
Commande
Description
Off
Normal operation ("Bridge Lock" function disabled).
This value is taken by default.
On
The modem blocks all communication from the Internet and to the Internet. To
reenable traffic, you must select Bridge Lock : Off again.
Automatic
If there is no traffic to the Internet for a certain period of time (configurable),
any traffic from the Internet is blocked. When traffic to the Internet is detected,
traffic from the Internet is reenabled.
TM
908 / 948 Reference Manual - Ethernet Interface
and
the
screen
16
Advertisement
Table of Contents
