Mib Loading; Hp Openview Network Node Manager 6.41 And Earlier - Avaya IP403 Installation Manual

Technical Data

MIB Loading

In order to SNMP manage an IP Office system, that is browse its MIBs and fully interpret
the traps it sends out, the MIBs supported by IP Office must be loaded and compiled for
use with your Network Management System. The supported standard and proprietary
MIBs together with the MIB files relied upon for definitions are provided on the IP Office
Admin CD off the directory snmp_mibs. Detailed below are details of how to install the
appropriate MIBs with a number of Network Management Systems.

HP OpenView Network Node Manager 6.41 and earlier:

MIBs are installed in Network Node Manager by selecting Options and Load/Unload MIBs:
SNMP from the menu and then using the Load... option and browsing for MIB files to load
and compile. The following MIBs must be installed in the order listed to fully SNMP
manage an IP Office system:
MIB file
RFC2737-ENTITY-MIB
AVAYAGEN-MIB.mib
IPO-PROD-MIB.mib
IPO-MIB.mib
INET-ADDRESS-MIB.mib
RFC2213-INTEGRATED-
SERVICES-MIB
DIFFSERV-DSCP-TC.mib
DIFFSERV-MIB-HPOV.mib
IPO-PHONES-MIB.mib
IP Office (R2.1) Installation Manual
40DHB0002UKCL – Issue11c (19th November 2004)
Source
snmp_mibs\standard on OpenView install CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\standard on OpenView install CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
Technical Specifications - Page 81
Technical Data - Page 81
Technical Specifications