Telephone Installation; Checking Telephones; Connecting & Testing Ip Office Telephones - Avaya IP403 Installation Manual

Telephone Installation

Telephone Installation

Checking Telephones

It is preferable to leave connection of telephones until after installation of other IP Office
equipment and full system programming has been completed (including the set-up of
directory numbers and names). Note that by IP Office telephones we mean devices
manufactured and supplied as part of the IP Office product range and not third party
telephone devices.
While installing and checking each telephone, it may also be required to do some basic
telephone programming such as setting-up call forwarding, call pickup, group numbers,
etc.
The detailed instructions for setting-up these feature are contained in the Manager
Application Manual and within the Configuration Tree Help files. With the configuration
tree for Administrator open, press F1 to access the Help files.
The following instructions are the minimum required for testing and wall mounting of IP
Office telephones. Detailed instructions for testing, wall mounting and using IP Office
telephones are contained in the appropriate Installation and User Guides contained on the
CD supplied with each system.
Also see:
Connecting & Testing IP Office Telephones on page 47
Connecting & Checking Two-Wire Telephones on page 48
Power Fail Telephones and Sockets on page 48
Connecting & Testing IP Office Telephones
Use the following process to connect and check IP Office telephones.
To check a IP Office telephone :
1. Unpack the telephone and check that all parts are present including labels and user
guides.
2. Insert the handset cord into the base. Route the cord thorough the cable channels to
come out at the side of the telephone.
3. Insert the line cord into the wall socket.
4. Insert the line cord into the telephone's base and route the cord thorough the cable
channels to come out at the side/rear of the telephone.
5. Lift the handset, check that you hear dial tone and make a test call to another
extension.
6. On a display telephone, ensure that the display shows the number called and that the
display is in the correct language.
Note:
IP Office (R2.1) Installation Manual
40DHB0002UKCL – Issue11c (19th November 2004)
On 44/4600 series telephones, the line cord is fitted with an RJ11 plug. In which
case, when connecting directly to an IP Office module, an RJ11/RJ45 adapter
should be used. Similarly, the structured wiring should terminate in RJ11 sockets.
Checking Telephones - Page 47
Telephone Installation - Page 47
Checking Telephones