Parking Brake Button; Drive Select Lever - Yamaha VK540V Owner's Manual

1
2
817-006
3
D
4
R
5
L
817-007
ESU00341

Parking brake button

When parking the snowmobile or starting the engine,
apply the parking brake.
Squeeze the brake lever 1, push and hold the parking
brake button 2 down 3, and then release the brake
lever.
To release the parking brake, squeeze the brake lever.
WARNING
@
● Always set the parking brake before attempting to
start the engine.
●
Never run the snowmobile with the parking brake
applied. This may overheat the brake disc and
reduce braking ability.
@
ESU03371*

Drive select lever

The drive select lever is used to shift your snowmobile
into drive, reverse, or low. After coming to a complete
stop, squeeze the stopper underneath the lever and
move the lever to the desired position.
1 Drive select lever
2 Stopper
CA-18E
Lever position
3 D
4 R
5 L
NOTICE
@
Do not shift from forward to reverse or from reverse
to forward while the snowmobile is moving. Other-
wise, the drive system could be damaged.
@
5-4
Snowmobile movement
Drive (forward)
Reverse
Low (forward)