Routing Configuration; Configuring Static Routing - Extreme Networks Summit WM100 Getting Started Manual

5 Routing configuration

5.1 Configuring static routing

120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
This chapter explains how to configure static routing and OSPF routing on the
Summit WM Switch.
The topics in this chapter are organized as follows:
• Configuring static routing
• Configuring the OSPF routing
To configure a static route:
1. From the main menu, click Summit Switch Configuration. The Summit
Switch Configuration screen is displayed.
2. In the left pane, click Routing Protocols. The Routing Protocols screen is
displayed.
3. To add a new route, type the destination IP address of a packet in the
Destination Address text box.
HWC_GSG_RouterConfiguration.fm
Routing configuration
Configuring static routing
53