Table of Contents
Advertisement
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
•
Input Hex – If you enable Input Hex, the WEP Key text box is displayed.
Type the WEP Key manually in this text box.
•
Input String – If you select Input String, the following two text boxes are
displayed –Strings and WEP Key. Type the secret WEP Key string in the
WEP Key String text box. The WEP Key text box is automatically filled
by the corresponding Hex code.
6. To save your changes, click Save.
8.7.1.2 Configuring WPA-PSK
To configure WPA-PSK privacy:
1. From the main menu, click WM Access Domain Configuration. The WM
Access Domain Configuration screen is displayed.
2. In the left pane, click the SSID WM-AD for which you want to configure WPA-
PSK privacy. The Topology tab is displayed.
3. Click the Privacy tab.
4. Select WPA-PSK.
5. Select WPA v1.
If you select WPA v1, its subordinate Encryption drop-down menu is
enabled.
HWC_GSG_VNSConfiguration.fm
WM-AD configuration
Configuring privacy for WM-AD
117
Advertisement
Table of Contents
