Configuring Dns For Internet Access - Extreme Networks Summit WM100 Getting Started Manual

Extreme summit wm100: user guide
Hide thumbs Also See for Summit WM100:
Table of Contents

Advertisement

120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide

6.3.1 Configuring DNS for internet access

To configure DNS for internet access:
1. Click Start, point to All Programs, point to Administrative Tools, and then
click Configure Your Server Wizard.
2. Click Next. The Summary of Selections window is displayed.
Note:
The Summary of Selections window should list the following two items: Install
DNS and Run the Configure a DNS Wizard to configure DNS.
If the Summary of Selections window does not list these two items, you must:
• Click Back to return to DNS Server Roles window.
• Click DNS.
• Click Next.
3. In the Summary of Selections window, click Next. The Select
Configuration Action window is displayed.
When the Configure Your Server wizard installs the DNS service, it first
determines whether the IP address for this server is static or the server is
configured to secure it automatically.
If your server is currently configured to obtain its IP address, the wizard
prompts you to configure the server with a static IP address instead of
displaying the Select Configuration Action window.
To configure the server with a static IP address:
a) In the Local Area Connection Properties, click Internet Protocol (TCP/
IP), and then click Properties. The Internet Protocol (TCP/IP)
Properties window is displayed.
b) In the Internet Protocol (TCP/IP) Properties window, click Use the
following IP address.
c) In the Static IP address, Subnet mask, and the Default gateway text
boxes, type the static IP address, the subnet mask and the IP address of
the default gateway respectively.
d) In the Preferred DNS text box, type the IP address of the server.
e) In the Alternate DNS text box, type the IP address of another internal
DNS server.
The Alternate DNS text box is optional.
f)
Click OK, and then click Close.
4. In the Select Configuration Action window, select the Create a forward
lookup zone checkbox, and then click Next. The Primary Server Location
window is displayed.
HWC_GSG_ConfiguringExternalServers.fm
Configuring DHCP, DNS and IAS services
DNS service configuration
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

Summit wm1000Summit wm200Summit wm2000

Table of Contents