Table of Contents
Advertisement
HWC_GSG_APConfiguration.fm
Altitude AP's configuration
Configuring the Altitude APs for the first time
7.2 Configuring the Altitude APs for the first time
82
Before you start configuring the Altitude APs, ensure that you have:
•
Set-up, installed and configured the Summit WM Switch.
•
Installed the Altitude APs at the location indicated by your site survey.
To configure the Altitude APs for the first time:
1. From the main menu, click Altitude AP Configuration. The Altitude AP
screen is displayed.
2. In the left pane, click WAP Registration.
3. In the Security Mode section, select one of the following options:
Note: Security mode is a Summit WM Switch property. It defines how the Summit WM
Switch behaves when registering new devices. During the registration process, the
Summit WM Switch's approval of the Altitude APs depends on the security mode that
has been set.
•
Allow all WAPs to connect:
•
If the Summit WM Switch does not recognize the registering serial
number, a new registration record is automatically created for the
Altitude AP. The Altitude AP receives a default configuration.
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
Advertisement
Table of Contents
