Table of Contents
Advertisement
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
11. From the main menu of the secondary Summit WM Switch, click Altitude AP
Configuration. The Altitude AP Configuration screen is displayed.
12. Repeat Step 9 to Step 10.
13. To save your changes, click Save.
Note: After you have assigned Altitude APs to their home Summit WM
Switch, you must check Active Altitude APs Report screen to ensure that
all those approved APs are indeed connected to their home Summit WM
Switch. For more information, see
APs report", on page
9.2.4 Enabling availability pair, defining primary
Summit WM Switch, and selecting security mode
Steps 4, 5 and 6 of the availability configuration process involve enabling
availability pair, defining primary Summit WM Switch, and selecting security
mode.
To enable the availability pair, define the primary Summit WM Switch, and
select the security mode:
1. Login on both the Summit WM Switches.
2. From the main menu of the primary Summit WM Switch, click Altitude AP
Registration. The Altitude AP Registration screen is displayed.
3. In the left pane, click WAP Registration. The WAP Registration screen is
displayed.
4. In the Registration mode section, click Paired.
5. From the main menu of the secondary Summit WM Switch, click Altitude AP
Configuration. The Altitude AP Configuration screen is displayed.
6. In the Registration mode section, click Paired.
7. From the main menu of the primary Summit WM Switch, click Altitude AP
Configuration.
8. In the Summit WM Switch IP Address text box, type the IP address of the
physical port of the secondary Summit WM Switch.
9. Select Current Summit Switch is primary connection point.
10. From the main menu of the secondary Summit WM Switch, click Altitude AP
Configuration. The Altitude AP Configuration is displayed.
HWC_GSG_Avail&MobilConfiguration.fm
Availability and Mobility configuration
Section 9.2.6, "Viewing the active Altitude
129.
Configuring availability feature
127
Advertisement
Table of Contents
