Configuring Summit Wm Switch As A Mobility Agent - Extreme Networks Summit WM100 Getting Started Manual

Extreme summit wm100: user guide
Hide thumbs Also See for Summit WM100:
Table of Contents

Advertisement

HWC_GSG_Avail&MobilConfiguration.fm
Availability and Mobility configuration
Configuring mobility
134
If you select Enabled in the SLP Registration drop-down list, you must configure SLP on
the network.
Note: If you have configured DHCP service in Windows 2003 server, you must make
sure to enable Option 78 SLP DA in Configure Options window. For more
information on how to configure Option 78 SLP DA, see
DHCP in Windows 2003 Server", on page
8. In the Add text box, type the IP address of the Summit WM Switch mobility
agent. The IP address is displayed in the Permission List box.
You can add as many agents you want by repeating Step 8.
9. In the Permission List box, select the IP addresses you want to approve.
10. Click Approve. The IP addresses are approved.
11. In the Security Mode section, select either of the two options:
Allow all mobility agents to connect – A new agent automatically
registers itself with the mobility manager and becomes part of the mobility
domain.
Allow only approved mobility agents to connect – The manager does
not allow a new agent to automatically register. Instead, the connection
with the new agent is placed in pending state until the administrator
approves it.
12. To save your changes, click Save.
9.4.2 Configuring Summit WM Switch as a mobility
agent
To configure Summit WM Switch as a mobility agent:
1. From the main menu, click Summit Switch Configuration. The Summit
Switch Configuration screen is displayed.
2. In the left pane, click Mobility Manager. The Mobility Manager Settings
screen is displayed.
3. To enable mobility for this Summit WM Switch, select Enable Mobility. The
mobility options are displayed.
4. Select This Summit Switch is a Mobility Agent. The mobility agent options
are displayed.
5. In the Port drop-down list, select the interface of the Summit WM Switch that
is to be used as the mobility agent.
Ensure that the selected interface is routable on the network.
Section 6.1.1, "Configuring
61.
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Summit wm1000Summit wm200Summit wm2000

Table of Contents