Routing Configuration Example - Extreme Networks Summit1 Installation And User Manual

Table 9-3: ICMP Configuration Commands (continued)
Command
disable icmp unreachables {vlan <name> | all}
disable icmp useredirects
disable irdp {vlan <name> | all}
R
OUTING
Figure 9-2
• Finance
— Protocol-sensitive VLAN using the IP protocol
— Ports 1 and 3 have been assigned
— IP address 192.207.35.1
• Personnel
— Protocol-sensitive VLAN using the IP protocol
— Ports 2 and 4 have been assigned
— IP address 192.207.36.1
• MyCompany
— Port-based VLAN
— All ports have been assigned
S S I
UMMIT WITCH NSTALLATION AND
C
ONFIGURATION
illustrates a switch that has three VLANs defined as follows:
U G
SER UIDE
Description
Disables the generation of ICMP unreachable
messages on one or more VLANs.
Disables the changing of routing table
information when an ICMP redirect message
is received.
Disables the generation of router advertisement
messages on one or more VLANs.
E
XAMPLE
R C E
OUTING ONFIGURATION XAMPLE
9-15