Table of Contents
Advertisement
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
•
Replace Gateway IP with FQDN – If you are using FQDN (Fully
Qualified Domain Name) as the gateway address, you must type the
FQDN in this text box.
•
Default Redirection URL – The URL to which the wireless devices will
be directed before authentication.
•
Specific Message URL –
14. In the right pane, select the VSA (Vendor Specific Attributes) that you want to
send to the authentication server along with other authentication details for
authentication purpose.
•
AP Serial Number
•
AP Name
•
WM-AD Name
•
SSID
•
MAC Address
The selection of these VSAs dictate with what VSA the wireless users will be
identified. For example, the wireless users can be identified by which Altitude
AP or WM-AD they are using.
15. To provide the users with logoff button to signout, select Logoff.
If you select Logoff, the users will be provided with a logoff button to signout.
The logoff button launches a pop-up logoff screen, empowering the users to
control their logoff.
16. to provide the users with a status check button, select Status check.
The Status check button enables the users to monitor session statistics such
as system usage and time left in a session.
17. To save your changes, click Save.
18. To review your Captive Portal page, click View Sample Portal. The login
screen of the portal is displayed.
HWC_GSG_VNSConfiguration.fm
Configuring authentication mechanism for WM-AD
WM-AD configuration
107
Advertisement
Table of Contents
