Table of Contents
Advertisement
HWC_GSG_VNSConfiguration.fm
WM-AD configuration
Configuring authentication mechanism for WM-AD
This display is the result of
what you entered in the
Message box.
This display is the result of
what you entered in the
Footer URL box.
108
8.5.1.2 Configuring external Captive Portal authentication
In order to configure the authentication mechanism, you must first create and
configure a WM-AD. For more information, see the following.
•
Section 8.1, "WM-AD topology overview"
•
Section 8.2, "Creating and configuring a Routed WM-AD"
•
Section 8.3, "Creating and configuring a Bridge Traffic Locally At SWM WM-
AD".
To configure external Captive Portal:
1. Configure internal captive portal authentication. For more information, see
Step 1 to Step 10 of
authentication", on page
2. Click Configure Captive Portal option. The Captive Portal Configuration
screen is displayed.
3. Select the External Captive Portal option.
4. In the SWM Connection drop-down list, click the Summit WM Switch's IP
address.
5. In the Port text box, type the Summit WM Switch's port.
Section 8.5.1.1, "Configuring internal Captive Portal
104.
Summit WM, Getting Started Guide
This display is the result of
what you entered in the
Header URL box.
The display of Login and
Password is the result of
entries you made in Login
Label and Password boxes.
120385-00 Rev 01, March 2007
Advertisement
Table of Contents
