Boot Option Commands - Extreme Networks BlackDiamond 6800 User Manual

U
SING
You can download a previously saved configuration from a TFTP server. To download a
configuration, use the following command:
download config <ipaddress> <filename>
After the ASCII configuration file is downloaded by way of TFTP, you are prompted to
reboot the system. The downloaded configuration file is stored in an area of system
memory, and is not retained if the BlackDiamond has a power failure. When the system
is rebooted, it treats the downloaded configuration file as a script of command-line
interface commands. After the script is executed, you are prompted to save the
configuration.
B
OOT
Table 13-1
Table 13-1: Boot Option Commands
Command
show config
download bootrom <ipaddress> <filename>
download config <ipaddress> <filename>
download image [xmodem | <ipaddress>
<filename>] {primary | secondary}
copy image from [msm-a | msm-b] to [msm-a |
msm-b]
B D U G
LACK IAMOND SER UIDE
TFTP D
TO OWNLOAD THE
O C
PTION OMMANDS
lists the commands associated with BlackDiamond boot options.
U TFTP
SING TO
C
ONFIGURATION
Description
Displays the current configuration to the
terminal. You can then capture the output and
store it as a file.
Downloads a BOOT ROM image from a TFTP
server. The downloaded image replaces the
BOOT ROM in the onboard FLASH memory.
Downloads a previously saved ASCII
configuration file from a specific IP host.
Downloads a new image by way of XMODEM
using the serial port, or from a TFTP server
over then network. If no parameters are
specified, the image is saved to the current
image.
Copies the primary and secondary image
stored in the onboard FLASH memory from
one MSM to another MSM.
D C
OWNLOAD THE ONFIGURATION
13-5