Configuring Qos; Pqm Commands; Qos Configuration Commands - Extreme Networks BlackDiamond 6800 User Manual

Q S (Q S)
UALITY OF ERVICE O
Table 7-3 describes the PQM commands.
Table 7-3: PQM Commands
Command
enable qosmonitor {port <slot:portlist>}
disable qosmonitor
show port {<slot:portlist>} qosmonitor
C
ONFIGURING
Table 7-4 describes the commands used to configure QoS.
Table 7-4: QoS Configuration Commands
Command
enable pace
create qosprofile <qosname>
config qosmode [ingress | egress]
7-8
Q S
O
Description
Enables the QoS monitoring capability.
When no port is specified, the QoS monitor
automatically samples all the ports and
records the sampled results. Error
messages are logged to the syslog if the
traffic exceeds the parameters of the QoS
profile(s). The default setting is disabled.
Disables the QoS monitoring capability.
Displays real-time QoS statistics for one or
more ports.
Description
Enables recognition of the PACE bit.
Available in ingress mode, only.
Creates a QoS profile. The default values
assigned to a created QoS profile are
Minimum bandwidth — 0%
Maximum bandwidth — 100%
Priority — low
Changes the QoS mode to ingress mode
or egress mode.
B D U G
LACK IAMOND SER UIDE