Displaying Rip Settings - Extreme Networks BlackDiamond 6800 User Manual

The example in
create vlan Finance
create vlan Personnel
create vlan MyCompany
config Finance protocol ip
config Personnel protocol ip
config Finance add port 1:*,3:*
config Personnel add port 2:*,4:*
config MyCompany add port all
config Finance ipaddress 192.207.35.1
config Personnel ipaddress 192.207.36.1
enable ipforwarding
config rip add vlan all
enable rip
D
ISPLAYING
To display settings for RIP, use the commands listed in
Table 9-2: RIP Show Commands
Command
show rip {vlan <name> | all}
show rip stat {vlan <name> | all}
B D U G
LACK IAMOND SER UIDE
Figure 9-4 is configured as follows:
RIP S
ETTINGS
Table 9-2.
Description
Displays RIP configuration and statistics for
one or more VLANs.
Displays RIP-specific statistics. Statistics
include the following per interface:
Packets transmitted
Packets received
Bad packets received
Bad routes received
Number of RIP peers
Peer information
D RIP S
ISPLAYING ETTINGS
9-13