Using Extremeware Vista; Enabling And Disabling Web Access - Extreme Networks BlackDiamond 6800 User Manual

12

Using ExtremeWare Vista

ExtremeWare Vista is device-management software running in the BlackDiamond that
allows you to access the system over a TCP/IP network, using a standard Web browser.
Any properly configured standard Web browser that supports frames and JavaScript
(such as Netscape Navigator 3.0 or higher, or Microsoft Internet Explorer 3.0 or higher)
can be used to manage the system.
ExtremeWare Vista provides a subset of the command-line interface commands
available for configuring and monitoring the BlackDiamond. If a particular command is
not available using ExtremeWare Vista, you must use the command-line interface to
access the desired functionality.
E D W A
NABLING AND ISABLING EB CCESS
By default, Web access is enabled on the BlackDiamond. To disable it, use the following
command:
disable web
To re-enable Web access, use the following command:
enable web
You will need to reboot the system in order for these changes to take effect.
For more information on rebooting, refer to Chapter 13.
B D U G 12-1
LACK IAMOND SER UIDE