Table 2-7: SNMP Configuration Commands (continued)
Command
config snmp syscontact <string>
config snmp sysname <string>
config snmp syslocation <string>
D
ISPLAYING
To display the SNMP settings configured on the BlackDiamond, enter the following
command:
show management
This command displays the following information:
• Enable/disable state for telnet, SNMP, and Web access
• SNMP community strings
• Authorized SNMP station list
• SNMP trap receiver list
• Login statistics
B
D
U
G
LACK
IAMOND
SER
UIDE
SNMP S
ETTINGS
Description
Configures the name of the system
contact. A maximum of 255 characters is
allowed.
Configures the name of the system. A
maximum of 255 characters is allowed.
The default sysname is the model name of
the device (for example, BD6800). The
sysname appears in the BlackDiamond
prompt.
Configures the location of the system. A
maximum of 255 characters is allowed.
U
SNMP
SING
2-21