Logging Commands - Extreme Networks BlackDiamond 6800 User Manual

Table 11-5: Logging Commands
Command
config log display {<priority>} {<subsystem>}
config syslog <ip_address> <facility>
{<priority>} {<subsystem>}
enable log display
enable syslog
disable log display
disable syslog
B D U G
LACK IAMOND SER UIDE
Description
Configures the real-time log display. Options
include:
priority — Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
subsystem — Filters the log to display
messages associated with the selected
switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
displayed.
Configures the syslog host address and filter
messages sent to the syslog host. Options
include:
ipaddress — The IP address of the
syslog host.
facility — The syslog facility level for
local use.
priority — Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, only critical priority messages and
are sent to the syslog host.
subsystem — Filters the log to display
messages associated with the selected
switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
sent to the syslog host.
Enables the log display.
Enables logging to a remote syslog host.
Disables the log display.
Disables logging to a remote syslog host.
L
OGGING
11-15