Extreme Networks BlackDiamond 6800 User Manual page 78

V LAN (VLAN )
IRTUAL S S
Table 4-2: VLAN Configuration Commands (continued)
Command
config protocol <protocol_name> [add | delete]
<protocol_type> <hex_value> {<protocol_type>
<hex_value>} ...
config vlan <name> ipaddress <ipaddress>
{<mask>}
config vlan <name> [add | delete] port
<slot:portlist> {tagged | untagged}
config vlan <name> delete port <slot:portlist>
{tagged | untagged}
config vlan <name> protocol [<protocol_name>
| any]
config vlan <name> qosprofile <qosname>
config vlan <name> tag <vlanid>
4-16
Description
Configures a protocol filter. Supported
<protocol_type> values include:
etype
llc
snap
The variable <hex_value> is a hexadecimal
number between 0 and FFFF that represents
either the Ethernet protocol type (for
EtherType), the DSAP/SSAP combination (for
LLC), or the SNAP-encoded Ethernet protocol
type (for SNAP).
Assigns an IP address and an optional mask to
the VLAN.
Adds one or more ports to a VLAN. You can
specify tagged port(s), untagged port(s). By
default, ports are untagged.
Deletes one or more ports from a VLAN.
Configures a protocol-based VLAN. If the
keyword any is specified, then it becomes the
default VLAN. All packets that cannot be
classified into other protocol-based VLANs are
assigned to the default VLAN of that port.
Configures a VLAN to use a particular QoS
profile. Dynamic FDB entries associated with
the VLAN are flushed once the change is
committed.
Assigns a numerical VLANid. The valid range
is from 1 to 4095.
B D U G
LACK IAMOND SER UIDE