Using Extremeware Vista - Extreme Networks BlackDiamond 6800 User Manual

Table 2-5: IP Host Configuration Commands (continued)
Command
config iproute add <ipaddress> <mask> <gateway>
{<metric>}
config iproute delete <ipaddress> <mask>
<gateway>
config iproute add default <gateway> {<metric>}
config iproute delete default <gateway>
show ipconfig {vlan <name> | all}
show ipstats {vlan [<name> | all]}
show iparp {<ipaddress | vlan <name> | all |
permanent}
U
SING
ExtremeWare Vista is device-management software running in the BlackDiamond that
enables you to access the system over a TCP/IP network using a standard Web browser.
Any properly configured standard Web browser that supports frames (such as Netscape
Navigator 3.0 or Microsoft Internet Explorer 3.0) can manage the system over a TCP/IP
network.
For more information on assigning an IP address, refer to
Parameters,"
The default home page of the BlackDiamond system can be accessed using the
following command:
http://<ipaddress>
When you access the home page of the system, you are presented with the Logon
screen.
B D U G
LACK IAMOND SER UIDE
E W
XTREME ARE
on page 2-13.
Description
Adds a static address to the routing table.
Use a value of 255.255.255.255 for mask
to indicate a host entry.
Deletes a static address from the routing
table.
Adds a default gateway to the routing
table. A default gateway must be located
on a configured IP interface. If no metric is
specified, the default metric of 1 is used.
Deletes a default gateway from the routing
table.
Displays configuration information for one
or more VLANs.
Displays IP statistics for the CPU of the
system.
Displays the IP ARP table. You can filter
the display by IP address, VLAN, or
permanent entries.
V
ISTA
U E W V
SING XTREME ARE ISTA
"Configuring System IP
2-17