Thermador Ultimate Culinary Center Pro Grand User Manual page 61

Steam range
Table of Contents

Advertisement

Starting Cooking
In EasyCook programs, the rack location, baking pan type,
and cooking times have been pre-selected for the food type
and weight you have chosen.
7. Press ENTER again.
— The display will show the rack level (levels 1 – 3)
and specific ovenware/accessories that should be
used.
8. Place food in steam oven.
9. Press ENTER again.
— The display will show "Cook Timer" on the first line
and the automatic cooking time for the particular
choice of food on the second line.
10. Press ENTER and the oven will begin preheating.
— The preheat bars, 1 bar up to 4, will display on the
first line and the current oven temperature on the
second. Once the oven reaches 90 – 95% of the
pre-selected temperature, the cook time
countdown will be activated.
During Cooking
After preheat, the display will indicate the specific cooking
mode being used, the automatic temperature for that
program (for example, "Steam - 212°"), and the automatic
cooking time.
>
>
K i
S t
e a
t c
C o
2 1
m
h e
o k
2 °
E N
E N
T i
T E R
T E R
The cook timer will now begin counting down from that
automatic time to 0:00 in the same manner as all the other
cooking cycles.
All manuals and user guides at all-guides.com
n
T i
m e
m e
r
r
C A
C A
N C
N C
E L
E L
Figure 39: Steam Display Screen
At the End of an EasyCook
When the cook timer reaches 0:00, the EasyCook program
will end. The display will beep to signal the end of t he
cooking time. The timer will beep until you turn the Mode
Selector Ring or the Temperature Control Knob to OFF.
Pressing the CANCEL button will also disable the buzzer
even if the oven has not been turned to OFF.
If 30 minutes passes with no further action to stop the timer
beep or turn the oven off, the beep will stop and the d isplay
will go blank.
Canceling the Program during Operation
While an EasyCook mode is running, if you press CANCEL,
the display prompt will read "Cancel EasyCook?" If the oven
is still preheating, the preheat temperature will display on the
second line. If the oven has reached cooking temperature,
the countdown time will display on the second line.
To stop the operation, press ENTER. The screen will go
blank. Turn the Mode Selector Ring to OFF.
To continue cooking, press CANCEL again. If the oven
was in preheat, heating will resume and the preheating
bars will show on the display. If the oven was past preheat,
then "Cook Timer" and the countdown time will continue to
display.
3 0
3 0
2 5 0
2 5 0
2 0 0
2 0 0
1 0 0
1 0 0
TM Program
English 57

Advertisement

Table of Contents
loading

Table of Contents