Setting The Limit Switches - Siemens ARCADIS Orbic Installation And Startup

20
•
Attach the two limit switches at the cable module using M4 x 8 screws, washers and
contact washers
Fig. 11: Limit switch with cabling
Fig. 12: Setting the limit switch

Setting the limit switches

•
Manually move the C-arm into the end position.
ARCADIS Orbic
3D Reconstruction Upgrade Part 1
(Fig. 9 / p. 19)/(Fig. 10 / p. 19)/(Fig. 11 / p.
SPR2-320.814.02.01.02
01.05
20).
Page 20 of 46
CS SD 24
0
Siemens AG
Medical Solutions