Siemens ARCADIS Orbic Installation And Startup page 39

3D Reconstruction Upgrade Part 2
Fig. 38: Pre-mounted angulation part with marking
Fig. 39: Installed angulation part
•
Remove the square bar from the cable module (see
(Fig. 39 / p.
•
Move the angulation part into the cable module and attach it with screws
(Fig. 41 / p.
exactly
•
Secure cables with cable ties.
Siemens AG
Medical Solutions
39)).
40). Ensure that the markings (black lines) on the two gear wheels match
(Fig. 40 / p. 40).
SPR2-320.814.02.01.02
01.05
(Fig. 38 / p. 39) and
Page 39 of 46
CS SD 24
39
ARCADIS Orbic