44
Fig. 47: Label_4
•
Attach the large and small label for 3D reconstruction to the unit as shown in
(a/b/Fig. 45 / p.
•
Affix the safety label to the cover of the cable module as shown in
affix the second safety label to the cable module cover on the opposite side of the other
label.
•
Affix the 3D label to the ARCADIS Orbic C-arm (see
trolley (see
ARCADIS Orbic
3D Reconstruction Upgrade Part 3
43).
(1/Fig. 47 / p.
44)).
SPR2-320.814.02.01.02
01.05
(Fig. 46 / p.
(1/Fig. 46 / p.
43)) and the monitor
Page 44 of 46
CS SD 24
43). Also
Siemens AG
Medical Solutions