36
Fig. 33: Belt tensioning
•
Loosen the belt tightener at the coupling unit
•
Install the wide toothed belt on the motor
•
Tighten the belt. On the opposite side of the belt tightener, it should be possible to press
the belt down approx. 2 - 3 mm with your thumb
Fig. 34: Belt pulley
ARCADIS Orbic
3D Reconstruction Upgrade Part 2
SPR2-320.814.02.01.02
01.05
(Fig. 32 / p.
35).
(Fig. 32 / p.
35).
(Fig. 33 / p.
36).
Page 36 of 46
CS SD 24
Siemens AG
Medical Solutions