Basic Operating Procedures; Selecting The Language Displayed In The Menus And Dialog Boxes - Simrad SN90 Operator's Manual

Basic operating procedures

Topics
Selecting the language displayed in the menus and dialog boxes, page 43
Selecting operating frequency for minimum noise, page 44
Hiding the menu system when you do not need it, page 45
Saving single or sequential screen captures, page 45
Saving the current user settings, page 47
Defining the ping (transmission) modes, page 48
Selecting the language displayed in the menus and dialog
boxes
You may prefer to use the SN90 with a user interface in your own language.
The function allows you to select the language to be used in the SN90
Language
presentations, menus and dialog boxes.
Context
With a few exceptions, the chosen language will also be used for all other text on the
SN90. The SN90 help may not be available for the language you choose. If your
language is not supported, the English help is provided.
Procedure
1 Open the
Setup
2 Select the middle of the
3 Select the language you wish to use.
Result
All the texts in the user interface are changed to the selected language.
The context sensitive on-line help may also be available in your language. To change the
language in the on-line help, you may need to restart the SN90.
Related topics
Basic operating procedures, page 43
381295/B
menu.
button to open the list of available options.
Language
Getting started
43