Table of Contents
Advertisement
E
Playback Progress
you have chosen to restart the replay file(s) automatically (in a loop), the green
indicator starts from left every time the file restarts.
Procedure
1
Open the
Operation
2
Set
to Replay.
Operation
The replay bar opens automatically. It is positioned directly below the top bar at the
top of the SN90 presentation.
If you need to select which files to replay, select
button. You can also select the large button in the middle of the replay bar.
3
Select
Play/Pause
4
To stop the replay choose any other operating mode.
Related topics
Choosing operating mode and key transmit parameters, page 55
Selecting Normal mode to start "pinging", page 55
Selecting Inactive mode, page 57
Recording and replaying echo data, page 87
Choosing which echo data file(s) to replay, page 90
Selecting Inactive mode
Inactive mode is provided to pause the SN90 operation temporarily. Neither transmission
nor reception will take place. The current echoes will be removed from the presentation.
Context
The
function controls the operating mode of the SN90. You can set it to
Operation
Normal, Replay or Inactive.
Note
Note that Inactive operating mode is not the same as Passive mode. While Inactive mode
stops both transmission and reception, Passive mode will still allow the SN90 to receive
echoes. To select passive mode set
Procedure
1
Open the
Operation
2
Set
to Inactive.
Operation
381295/B
: This bar shows you the progress of the replay sequence. If
menu.
to start the playback.
Operation
menu.
under the
Replay File
to Normal and
Tx Power
Operating procedures
Operation
to Off.
57
Advertisement
Table of Contents
