Table of Contents
Advertisement
Set the switch to position LOWER.
a
Lowering is automatically stopped when the
If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower Switch
b
Set the switch to position STOP.
5
Hoisting the transducer:
a
Set the switch to position HOIST.
Hoisting is automatically stopped when the
If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower Switch
b
Set the switch to position STOP.
6
Locate the
Hoist/Lower Switch
Note
For normal operation from the Operating Panel, the switch must be set to REMOTE.
7
Close the cabinet door.
Related topics
Lowering and hoisting the transducer from the sonar room, page 125
381295/B
to STOP.
to STOP.
(S302). Set the switch to position REMOTE.
Operating procedures
is activated.
Lower Limit Switch
is activated.
Upper Limit Switch
127
Advertisement
Table of Contents
