Basic Operating Procedures; Selecting The Language Displayed In The Menus And Dialog Boxes - Simrad SX90 Quick Start Manual

Simrad SX90 Quick Start Guide

Basic operating procedures

Topics
Selecting the language displayed in the menus and dialog boxes, page 36
Selecting operating frequency for minimum noise, page 37
Hiding the menu system when you do not need it, page 38
Saving single or sequential screen captures, page 39
Saving the current user settings, page 40
Defining the ping (transmission) modes, page 41
Selecting the language displayed in the menus and dialog
boxes
You may prefer to use the SX90 with a user interface in your own language.
The function allows you to select the language to be used in the SX90
Language
presentations, menus and dialog boxes.
Context
With a few exceptions, the chosen language will also be used for all other text on the SX90.
The SX90 help may not be available for the language you choose. If your language is
not supported, the English help is provided.
Procedure
1 Open the
Setup
2 Select the middle of the
3 Select the language you wish to use.
Result
All the texts in the user interface are changed to the selected language.
The context sensitive on-line help may also be available in your language. To change the
language in the on-line help, you may need to restart the SX90.
36
menu.
button to open the list of available options.
Language
386619/C