Secondary Procedures - Simrad EK80 Harbour Acceptance Test

Secondary procedures

Secondary procedures
The end user and technical documentation for the EK80 contains several procedures that
are also applicable for this Harbour Acceptance Test. These procedures are not part of
the Harbour Acceptance Test. They are provided for reference purposes only. If you
scan a completed Harbour Acceptance Test for archiving or reporting purposes, it is
not necessary to include these procedures.
Topics
Turning on the EK80, page 48
Turning off the EK80, page 49
Verifying that the bottom is correctly detected, page 50
Switching between ADCP and echo sounder operation, page 51
Defining the raw data recording parameters, page 52
Recording raw data, page 54
Selecting Replay mode, page 55
Choosing which raw data file(s) to replay, page 56
Defining the processed data recording parameters, page 58
Recording processed data, page 59
Installing one or more transducers, page 61
Installing transceiver channels, page 64
Checking the data transfer on an external interface line, page 66
Reading the transceiver hardware and software versions, page 34
Installing and troubleshooting Network Time Protocol (NTP), page 70
47
401925/C