Table of Contents
Advertisement
The
Operating Panel
your SN90, and to assign functionality to the programmable buttons. This page is located
in the
dialog box. The
Installation
Note
The SN90 supports two different operating panels. These are referred to as "Mk1" and
"Mk2". In this publication all descriptions and references are related to "Mk2".
Procedure
1
Open the
Setup
2
On the
menu, select
Setup
selected from the menu on the left side.
3
On the left side of the
4
Select Operating Panel Mk2.
5
Under
User Setting Buttons
Operating Panel.
6
At the bottom of the page, select
7
Continue your work in the
Related topics
Defining the user-selected features on the Operating Panel, page 119
381295/B
page is used to select which physical hardware panel you use on
Installation
menu.
Installation
dialog box, select
Installation
, assign one predefined setting to each button on the
Apply
Installation
dialog box is located on the
.
Observe that the
Installation
This dialog box contains a number of pages
Operating Panel
to save your settings.
dialog box, or select
Operating procedures
menu.
Setup
menu opens.
.
to close it.
OK
121
Advertisement
Table of Contents
