Table of Contents
Advertisement
Simrad SN90 Operator Manual
Choosing SN90 factory default settings
Sometimes it may be useful to reset the SN90 to work with a set of known user settings. A
set of "factory settings" is provided for this purpose. The settings may be put to use if you
are uncertain of which values to use. They offer "best practice" settings for typical use.
Context
The
dialog box is used to store your favourite SN90 settings. These settings
User Settings
can be related to different operations, environmental conditions or basic personal
preferences. You can use different settings to create as many user profiles as you like,
and give them any name. All the settings you have chosen using functions and dialog
boxes in the SN90 user interface are saved. To activate either a factory or a saved setting,
click the relevant name in one of the lists, then click the
The factory settings cannot be altered.
Note
Unless they are saved, all your current settings are lost when the factory settings are
applied. There is no "undo".
Procedure
1
Observe the
Main
Its default location is on the right side of the SN90 presentation.
2
Select
User Settings
Observe that the
3
Observe the
Factory Settings
4
Select the setting you wish to use.
5
Select
Activate Selected Setting
6
Select
to apply your changes and close the
OK
Related topics
Saving, retrieving and handling user settings, page 114
118
menu.
.
dialog box opens.
User Settings
list.
.
Activate Selected Setting
dialog box.
User Settings
button.
381295/B
Advertisement
Table of Contents
