H4: Analog Outputs - YASKAWA GA700 Technical Manual

Setting Function
1F Not Used
30 DWEZ Analog
Input 1
31 DWEZ Analog
Input 2
32 DWEZ Analog
Input 3
◆

H4: Analog Outputs

No.
Name
(Hex.)
H4-01 Terminal FM
Analog Output
(041D)
Select
H4-02 Terminal FM
Analog Output
(041E)
Gain
RUN
H4-03 Terminal FM
Analog Output
(041F)
Bias
RUN
H4-04 Terminal AM
Analog Output
(0420)
Select
H4-05 Terminal AM
Analog Output
(0421)
Gain
RUN
H4-06 Terminal AM
Analog Output
(0422)
Bias
RUN
H4-07 Terminal FM
Signal Level Select Sets the MFAO terminal FM output signal level.
(0423)
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Value for terminals that are not being used or terminals being used in through mode.
V/f CL-V/f OLV CLV AOLV
Use with DriveWorksEZ. Refer to the DriveWorksEZ online manual for more
information.
V/f CL-V/f OLV CLV AOLV
Use with DriveWorksEZ. Refer to the DriveWorksEZ online manual for more
information.
V/f CL-V/f OLV CLV AOLV
Use with DriveWorksEZ. Refer to the DriveWorksEZ online manual for more
information.
Description
V/f CL-V/f OLV CLV AOLV
Sets the monitor number to send from MFAO terminal FM.
Set the x-xx part of the Ux-xx [Monitor]. For example, set H4-01 =
102 to monitor U1-02 [Output Frequency].
V/f CL-V/f OLV CLV AOLV
Sets the gain of the monitor signal that is sent from MFAO terminal
FM.
Sets the analog signal output level from the terminal FM at 10 V or
20 mA as 100% when an output for monitoring items is 100%.
V/f CL-V/f OLV CLV AOLV
Sets the bias of the monitor signal that is sent from MFAO terminal
FM.
Set the level of the analog signal sent from terminal FM at 10 V or
20 mA as 100% when an output for monitoring items is 0%.
V/f CL-V/f OLV CLV AOLV
Sets the monitoring number to be output from the MFAO terminal
AM.
Set the x-xx part of the Ux-xx [Monitor]. For example, set H4-04 to
102 to monitor U1-02 [Output Frequency].
V/f CL-V/f OLV CLV AOLV
Sets the gain of the monitor signal that is sent from MFAO terminal
AM.
When an output for monitoring items is 0%, this parameter sets the
analog signal output level from the AM terminal at 10 V or 20 mA
as 100%.
V/f CL-V/f OLV CLV AOLV
Sets the bias of the monitor signal that is sent from MFAO terminal
AM.
Set the level of the analog signal sent from the AM terminal at 10 V
or 20 mA as 100% when an output for monitoring items is 0%.
V/f CL-V/f OLV CLV AOLV
Note:
Set jumper S5 on the terminal board to the correct position after
changing this parameter.
0 : 0 to 10 Vdc
1 : -10 to +10 Vdc
2 : 4 to 20 mA
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
10.10 H: Terminal Functions
Ref.
923
923
923
923
Default
Ref.
(Range)
102 925
(000 - 999)
100.0% 925
(-999.9 - +999.9%)
0.0% 925
(-999.9 - +999.9%)
103 925
(000 - 999)
50.0% 926
(-999.9 - +999.9%)
0.0% 926
(-999.9 - +999.9%)
0 926
(0 - 2)
10
563