Default Settings - Epson LQ-860 User Manual

Default Settings

The following table shows the default conditions that become valid
when the printer is initialized.
Item
Top of form position
Left and right margins
Line spacing
Vertical tab positions
Horizontal tab positions
VFU channel
Font selection
Character spacing
User-defined characters
Justification
Graphic mode assignment
In addition, the data buffer is cleared when the printer is initialized
by turning on the power or by sending an INIT signal.
Note: The user-defined character set is not cleared when the
printer is initialized by ESC 63.
Reset to:
Current paper position
Cancelled
1/6-inch line spacing
Cleared
Every eight characters
Channel 0
The current FONT button setting
The current PITCH button setting
Hardware: Cleared
Deselected only
Software:
Left justification
ESC K = ESC*0, ESC L = ESC*1,
ESC Y = ESC*2, ESC Z = ESC*3
Technical Specifications 8-19